How To Circulate Pool Water Without A Pump

For many of us, Pool has become an important part of our life. This thing needs regular maintenance and keeping in pleasant condition. And circulating water using a pump is one of the easiest ways to keep it in a sound state.

But what if we find ourselves without a pool pump or our pool pump got broken? Well, in that case, we have some alternatives to try. But keep in mind that they are not nearly as effective as a pump itself. You can have them for a temporary replacement, but in the long run, it’s better to have a pump.

How To Circulate Pool Water Without A Pump

However, you need to know how to circulate pool water without a pump. Before that, you better know, why is it necessary to circulate water?

Why is Circulating Water necessary?

There are some benefits that come with pumps to circulate water. Let’s know them first.

Stir Debris into Filter

To keep the pool neat, a deep cleaning session per week is enough. However, after regular daily use, the pool accumulates light debris. This needs to filter the water once per day to keep the pool clean.

Distribution of Chemicals

Using chemicals to clean the water of your pool is of most necessity. After chemical uses, it is also required to mix with the whole water of the pool. Water circulation helps the chemical to mix with the whole pool water.

Keep The Water Flow

Stagnant water is detrimental to both humans and the environment. The reservoir is the best place for various bacteria to breed, which are harmful to our health. Water-logging is also the birthplace of dangerous mosquitoes. Water circulation keeps those in check.

How To Circulate Pool Water Without A Pump

Following here, I shared two methods to circulate water without a pump.

Use A Siphoning Hose

In this method, you use a siphoning hose to drain your pool water. This method is suitable for above-ground pools. A siphoning hose is made of soft plastic, which makes this tube flexible. They are open on both-end and most of the time they are attached to a garden hose to extend its length.

For this method, you need a siphoning hose of desirable length. One thing is to remember, a bigger hose drains water faster than a smaller hose of the same length. So, in this time-consuming process, the more you can save time the better.

After you have found the right hose length, insert one side to the above-ground pool and connect the other side to a tap. Then, start the tap and let water flow into the hose, emptying it. Stop the tap and remove the garden hose while pointing toward the ground. This will drain the water from the pool to the ground and complete the siphoning process.

The siphoning hose as an alternative to pump drains water from the pool. After the pool is empty, you refill it with fresh water. This process takes a lot of your time and to get the desired result you need to repeat this process twice or thrice.

Use A Shop Vacuum

This method can be the best alternative to pumping water out of your pool without an actual pump. This method takes less time than siphoning hose to drain water from your pool.

A vacuum cleaner operates by making suction power from the vacuum bag which is connected to the cleaner. The electric motor connects to it sucks air in with dirt and other things in the bag.

We will use the same formula in this method. The cleaner creates a negative pressure inside the hose which pressures the atmosphere and pushes water into the hose. But make sure the vacuum hose is large enough to reach the pool bottom. If it can’t reach the pool end, you can extend it by adding a garden hose.

The water will suck through the vacuum hose into the debris bag. Open the debris bag and let the water flow out.

This method of cleaning is suitable for draining water from both aboveground and in-ground pools. To empty a small pool, shop vacuums take less than one hour. After the pool is empty, open the inlet valve to allow in freshwater. Thus, ensure water circulation.

This is a comparatively easy method to circulate water in the pool. There are some other methods too, which are very time-consuming that makes them unrealistic.

How To Maintain Your Pool Without A Pump

Cleaning and maintaining your pool regularly is also necessary, even if you don’t have a pump.

Test Pool Water

It is essential to check your pool chemical stability regularly. If your pool is chemically imbalanced, it will get cloudy and cause many skin problems. It’s become a living place for algae and other harmful bacteria.

Test Pool Water

It is recommended to test your pool water at least once a week. Test your pool water with reliable test kits and adjust the chemicals accordingly to get the right balance. The well-balanced water is clear and makes no foul odor.

Brushing Your Pool

If you don’t have the pump, most likely you won’t be able to use any suction pool cleaners, as they depend on your pool’s filtration system. But instead, you need to do that job manually. Brushing your pool is an alternative option to this. This will eliminate any debris from building up.

Skimming The Water Surface

Your pool needs to skim at least once a day. There is a lot of dirt falling on the surface of your pool with the blowing wind. The skimming helps you to get rid of the surface dirt.

To do that, you need a telescopic pole and a flat skimming net. Then simply skim through the water surface to capture dirt with the skimmer. And clean the debris from the skimmer.

You can also get an automatic skimmer to do this task. It can eradicate almost everything on the pool water.

Shocking Your Pool

Shocking is a drastic rise of the chlorine level of your pool for a small period of time to kill bacteria. It is done more in the warmer season than the cold season.  The pool chlorine is engineered to destroy bacteria, algae, and organic waste.

You can do this without a pump running. But you have to stir the pool manually.

Flossing Your Pool

As flossing teeth remove debris from building up on your teeth, flossing your pool also does the same. Using a Filter Flosser Deluxe Cleaner enlarges your pool life while reducing the maintenance cost, time, and energy.

Final Verdict

This is the solution to your problem ‘how to circulate pool water without a pump. You can use the mentioned methods to maintain or clean your pool. But as I said, having a pump is way better than that method. They are time-consuming and manual effort demanding. Although you can apply them for a short period, a pool pump is a must. 

FewBite
Logo